spalina BT-65105 Instrucciones página 9

• The floor should be able to sustain the weight.
• Install the bathtub according to the drawing
• Draining: A draining system shall be planned for the overflow. It's
recommended to position the draining hole as shown in the below
drawing. If not, the draining hole shall be within 200mm around the
ideal position and the diameter shall be less than 50mm. (Point D in
the drawing)
• Maintenance zone: Please leave a space of 500mm or more around
the bathtub for future maintenance. Do not install any fixed objects in
this area. (Point E in the drawing)
Product name Voltage
Bathtub 220-240V~
EN
DETAILS OF THE BATHTUB
iNSTALLATION
TECHNICAL DATA
Frequency
50Hz
• Electrical connection: Warning: connect the three conductors of the
supply cable to a connection box IPX5 in respecting the polarities as
following:
- Live: Brown
- Neutral: Blue
- Earth: Yellow/Green
• If you are not sure, it's recommended to ask a qualified electrician
for help.
Power
1610W
1. Pillow
2. Small water jet
3. Big water jet
4. Colored lamps
5. Short side panel
6. Long side panel
7. Water jet regulating knob
8. Water jet switch
9. Bubble switch
10. Light switch
11. Backflow hole
12. Overflow slit
13. Bubble nozzles
14. Drain hole
IP Water pressure
X5 0.2-0.6MPa
9