Warranty - caprari D Serie Instrucciones De Servicio

D - M / DS - MS
Series DX-MX/DSX-MSX
7) pour the oil into a clean vessel and check its condition (presence of impurities, traces of water) and quantity (consult the "Dimensions, weights
GB
10) pour in the right type and quantity of oil, using the previously drained oil if it is in an optimum condition (consult the "Oil chart" in the "Dimensions,
11) remount the electric pump by repeating the demounting operations in reverse and replace the hydraulic parts if they are worn.
Series DA-MA/DSA-MSA
3) pour the oil into a clean vessel and check its condition (presence of impurities, traces of water) and quantity (consult the "Dimensions, weights
7) remount the electric pump by complying with the demounting procedure in reverse, replacing the hydraulic parts if worn and the retaining rings if
Series MAT
Series DR/DSR
1) clean any impurities from the area where the three inspection screws are mounted, at the side of the hydraulics (the upper one for motor
the pump side in compliance with the relative procedure.
6.4 Inactivity:
Consult the "storage and handling chapter".
7 DISPOSAL OF A NO LONGER USABLE ELECTRIC PUMP:
When dismantling the product, the technician must proceed with the relative phases in strict compliance with the local rules and regulations
governing such activity.
End-of-life product disposal.
The crossed-out wheeled bin symbol on the electrical and/or electronic equipment (EEE) or on its package indicates that the product
must be collected separately at the end of its service life and not disposed of with other mixed municipal waste.
DOMESTIC EEE
Please contact your municipality, or local authority, for all the information regarding the locally available separate collection systems. The
retailer of the new equipment has the obligation to take back the old one upon the purchase of an equipment of equivalent type, in order to start the
European nations.
PROFESSIONAL EEE
The separate collection of this equipment after its useful life is organised and managed by the manufacturer. Therefore, any user that may want to
dispose of this equipment can either contact the manufacturer and follow the system implemented to separately collect the equipment at the end
of its useful life, or autonomously select an authorised waste management chain. In any case, the user must respect the take-back conditions laid
8

WARRANTY:

The general conditions of sale governing all products manufactured by Caprari S.p.A. are also valid for the electric pump unit in question.
In particular, remember that one of the essential conditions for recognition of the warranty is compliance with all the individual instructions given in
the enclosed documentation and the best hydraulic and electrotechnical provisions, fundamental condition to ensure regular operation of the electric
pump unit. Malfunction caused by wear and/or corrosion is not covered by the warranty.
Sales Centers. Failure to comply with the instructions in the documentation supplied with the electric pump shall void all form of guarantee and shall
relieve the manufacturer from all responsibility in merit.
16 Caprari S.p.A.