Braun Minipimer 7 Manual Del Usuario página 9

English
Our products are engineered to meet the highest
standards of quality, functionality and design.
We hope you thoroughly enjoy your new Braun
appliance.
Before use
Please read the use instructions carefully and
completely before using the appliance.
Caution
• The blades are very sharp! To avoid
injuries, please handle blades with
utmost care.
• Always unplug the appliance when it is left un-
attended and before assembling, disassembling,
cleaning and storing.
• The appliance is not intended for use by
children or persons with reduced physical,
sensory or mental capabilities, unless they are
supervised by a person responsible for their
safety. Keep the appliance out of reach of
children to ensure that they do not play with it.
• Do not hold the motor part (4) nor the whisk
gear box (8a) under running water, nor immerse
them in water.
• The lid (10a) can be cleaned under running
water, but do not immerse it in water, nor clean
it in a dishwasher.
• Braun electric appliances meet applicable
safety standards. Repairs or the replacement of
the mains cord must only be done by authorized
service personnel. Faulty, unqualified repair
work may cause considerable hazards to the
user.
• Before plugging into a socket, check whether
your voltage corresponds to the mains voltage
indicated on the appliance.
• The appliance is constructed to process normal
household quantities.
• The beaker (7) and the chopper bowls (9c, 10c)
are not microwave-proof.
Description
(see table on p. 4)
1 Safety button
2 Pilot light
3 Smartspeed switch / variable speeds
4 Motor part
5 Release buttons
6 Blender shaft
7 Beaker
8 a Gear box
b Whisk
9 Chopper «hc»
a Lid
b Blade
c Chopper bowl
d Anti-slip ring
99983546-01_MQ735_725_S6-80.indd 9 99983546-01_MQ735_725_S6-80.indd 9
10 Chopper «ca»
a Lid (with gear)
b Blade
c Chopper bowl
d Anti-slip ring
Please clean all parts before using for the first time
(see «Cleaning» / fig. E).
Pilot light
The pilot light (2) shows the status of the appliance,
when it is connected to an electrical outlet.
Pilot light Appliance/operating status
Red flashing Appliance is ready for use
Green Appliance is released (safety
button is pressed) and can be
switched on
Red Appliance is overheated. Let it
cool down. It is ready for use again
when the pilot light flashes red
Smartspeed technology
Smartspeed switch for variable
speeds
One squeeze, all speeds. The more you press, the
higher the speed (fig A.). The higher the speed, the
faster and finer the blending and chopping results.
One handed operation: the Smartspeed switch (3)
allows you to turn on the motor part and control the
speed with one hand.
How to use the appliance
First use: Remove the transportation lock from the
motor part (4) by pulling it at the red strap.
Switching on
(see p. 4/fig. A)
The appliance has a safety button. To safely switch
it on, follow these points:
1. First press the safety button (1) with your thumb
and hold. The pilot light will light up permanently
green.
2. Then directly press the Smartspeed switch (3)
according to the desired speed.
If the Smartspeed switch is not pressed within
5 seconds, the appliance cannot be switched on
for safety reasons.
9
17.01.13 08:38 17.01.13 08:38