Cleaning And Maintenance - HQ-Power VDPLW800 Manual Del Usuario

Detailed DMX Values per Channel
3-channel mode
Channel
CHANNEL 1
CHANNEL 2
CHANNEL 3
6-channel mode
Channel
CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 4
CHANNEL 5
CHANNEL 6
Projector DMX start address selection
All DMX-controlled devices need a digital start address so that the correct device responds to the signals. This start
address is the channel number from which the device starts to "listen" to the DMX controller. Enter the correct
number and read it from the display located on the base of the VDPLW800.
You can use the same starting address for a whole group of devices or enter an individual one for every device.
When all devices have the same address, all the VDPLW800s will "listen" to the control signal on one particular
channel. In other words: changing the settings of one channel will affect all devices simultaneously. If you set
different addresses, each device will "listen" to a separate channel number. Changing the settings of one channel will
only affect the device in question.
In the case of the 6-channel VDPLW800, you will have to set the start address of the first VDPLW800 to 1, the
second to 7 (1 + 6), the third to 13 (7 + 6) and so on.

6. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
VDPLW800_v2
Function From
Red
Green
Blue
Function From
Special effects
248
Red
Green
Blue
Strobe
254
Built-in programs
121
151
181
211
241
To
0 255 Red LEDs from OFF to full on
0 255 Green LEDs from OFF to full on
0 255 Blue LEDs from OFF to full on
To
0 4 No function
5 5 Full on
6 247 Special effects (LEDs change each two DMX values)
255 Full on
0 255 Red LEDs from OFF to full on
0 255 Green LEDs from OFF to full on
0 255 Blue LEDs from OFF to full on
0 4 No function
5 253 Strobe from fast to slow
255 Full on
0 4 No function
5 30 Built-in program 1
31 60 Built-in program 2
61 90 Built-in program 3
91 120 Built-in program 4
150 Built-in program 5
180 Built-in program 6
210 Built-in program 7
240 Built-in program 8
255 Sound activation mode
6
Description
Description
VELLEMAN