Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Place the tool upside down.
Remove 6 screws, and then remove the cover.
1
2
Fig.6
► 1 . Screw 2. Cover
3.
Remove the bolts and the shear blades from the
tool. Then remove the dust guard, the metal sleeves
and the flat washer from the shear blades.
4
Fig.7
► 1 . Bolt 2. Shear blades 3. Dust guard 4. Metal
sleeve 5. Flat washer
NOTICE:
Be careful not to lose the bolts, the
dust guard, the metal sleeves, and the flat washer.
These parts are needed again when installing new
shear blades.
1
2
3
5
9 ENGLISH
4.
Check if the resin sleeve remains on the machine,
and if so, remove the resin sleeve.
Fig.8
► 1 . Resin sleeve
NOTE: Old resin sleeves are not need to be stored.
The new shear blades include the new resin sleeves.
5.
Remove the blade cover, and then attach it to the
new shear blades.
Fig.9
► 1 . Blade cover
6.
Adjust the hole positions by turning the gear as
illustrated.
Fig.10
► 1 . Gear
1
1
1
Publicidad
