Descargar Imprimir esta página

universalblue UVH1400-20 Manual De Instrucciones página 12

Ocultar thumbs Ver también para UVH1400-20:

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
terminals of the battery.
Keep the remote control away
from fire.
It is advisable to remove
the battery from the remote
control If you are not going
to use it for a long period and
you are going to keep it stored.
PRODUCT FEATURES
The package contains the following items,
besides this manual and the product
warranty. See pictures 01 on page 4.
Note: The picture is for reference only. The
content may vary depending on the model.
1. Grill's frame
2. Mist accessory
3. Front grill
4. Blade nut
5. Blades
6. Grill nut
7. Fan's head
8. Mist hose
9. Fastening screw
10.
Main body
11. Base
12. Castors
13. Base nut
14.
Water tank
You can check the product features in table
01 on page 7.
ASSEMBLY AND INSTALLATION
Before unpacking the product, memorize
the position of each accessory in case you
need to repack it in the future.
The fan is packed with the grilles removed.
You must place the grilles before operating
the fan.
Warning: Never operate the fan without its
base or other parts.
Operate the fan only in an upright position;
22
any other position could create a dangerous
situation.
Assemble the base and other parts of the
appliance considering the following notes.
Note: the images are for guidance only and
should be used to support the installation.
• Attach wheels (14) to the base (12).
• Place the fan head (8) on the main fan
body (11) and secure both parts with the
fixing screw (10).
• Unscrew the nut from the base (13) and
place the main body on the base. Screw
the nut back in to secure both parts.
• Place the rear fan grill (7) and fix it with
the nut (6).
• Place the blades (5) and use the
fastening nut (4) so that they are fixed.
• Place the grill frame (1) over the front
grill (3) and secure both parts to the rear
grill.
• Insert the mist hose (9) into the
humidifier accessory (2), which is
located in the front grill.
USING THE APPLIANCE
This device is easy to use and does not
require much knowledge. However, we
advise you to familiarize yourself with the
instructions below.
To see what is the control panel and the
LED display see picture 02 on page 5.
15. LED display
16. Control panel
(see picture
LED display
03 on page 5)
17. Night mode
18. Normal wind
19. High speed
20.
Medium speed
21. Timing display
22.
Natural wind
23.
Humidifier
24.
Swing
25.
Low speed
(see picture
Control panel
04 on page 5)
26.
On/Speed
button:
The
button is used both to turn on the fan
and to set the desired speed on the
device. By touching the button once,
the fan will turn on at the minimum
speed. Pressing again 1 or 2 times will
activate the medium or high speed.
27.
Timer On/Off button:
• Press this button as many times
as necessary to set the start time
when the fan is turned off. Pressing
1 time will turn on the fan in 1 hour;
pressing 2 times will turn on the fan
in 2 hours... Pressing 12 times the fan
will turn on in 12 hours.
• Press this button as many times as
necessary to set the switch-off time.
Pressing 1 time the fan will turn off
in 1 hour; pressing 2 times the fan
will turn off in 2 hours... Pressing 12
times the fan will turn off in 12 hours
28.
Humidifier
button:
Press
button repeatedly to turn on/off the
humidifier function of the appliance.
29.
Off button: Press this button to
turn off the fan.
30.
Swing button: Press the button to
activate the fan oscillation. Pressing
again will stop the oscilla-tion.
(see picture
Remote control
05 on page 5)
The device incorporates a remote control,
for a more comfortable and efficient use.
In order for the remote control to work, it
must always be aimed at the fan.
The following fan functions can be
controlled from the remote control:
31. Activating/deactivating
dehumidifier function.
32.
Activating/deactivating the timer
33.
Turning the fan on and select the
speed.
34.
Select the operating mode of the
fan between normal, natural or night
mode
35.
Turn off the fan
36.
Activating/deactivating
device oscillation
Choosing wind's direction
To change the wind direction up or down,
speed
simply hold the fan's head and press lightly
until the desired wind direction is obtained.
To change the direction of the wind to the
left or right, we recommend that you use
the oscillation function. Do not change
the position of the side wind manually.
Otherwise the fan may be irreparably
damaged and is out of warranty.
NOTE: Wind models can only be selected
from the remote control.
Filling the water tank
This fan has a water tank, which must be
refilled periodically when you want to use
the humidifier function.
To refill the water tank, follow the
instructions below (see picture 06 on page
6):
37.
Remove the water tank
the
38.
Remove the tank cap
39.
Fill up the water tank with the
help of a bottle or pitcher.
Once the water tank has been emptied, a
red light will turn on indicating that the
tank must be refilled in order to continue
using the nebulizer function.
CLEANING AND MAINTENANCE
Instructions:
• Turn the fan off and wait until it has
stopped completely.
• Disconnect it from the power supply.
the
• Be careful to prevent any liquid from
getting inside the appliance.
• Use only a soft damp cloth.
• Do not allow water at a high temperature
in contact with the plastic parts.
• Do not use abrasive cleaners. You can
use a neutral detergent.
• When you have finished cleaning it,
assemble it again and store it in a dry
the
place.
• If you are not going to use the fan
for some time, it is recommended to
EN
23

Publicidad

loading