Topcom AXISS 830 Manual De Usuario página 10

Topcom Axiss 830
9 The SOS function
Please read carefully how the SOS scenario
works in chapter "1.1 Intended purpose".
It is important that the receiving party of
an emergency call presses "0" to accept
the call.
If the emergency call is not accepted, the
Axiss 830 will call the next number from
the emergency number list.
After 3 minutes a beep tone will indicate
that the emergency call will be
terminated. The receiving party should
press "15" to add an extra 3 minutes to
the emergency call.
Once the receiving party has pressed
"15" during the emergency call (or after 3
minutes to extend the call for another 3
minutes), the SOS function will be
deactivated.
If the receiving party did not press "15"
during the emergency or after the 3
minutes to extend the call, the SOS
function will not be deactivated and the
Axiss 830 will call the next number from
the emergency number list.
Each time the phone dials an emergency
number, the telephone line will be
occupied for at least 3 minutes, even
when the receiving party hung up the call.
9.1 Activate the SOS function
• Press the pendant button.
Or
• Press and hold the SOS key of the Axiss 830
for at least 4 seconds.
9.2 Deactivate the SOS function
• Press the pendant button.
Or
• Press the SOS key of the Axiss 830.
10
10 Technical specifications
Dialing mode : Tone dial (DTMF) / Pulse dial
Flash-time : 100/300/600 ms
External power : 9V DC – 300mA
Battery : 4 x AA Alkaline LR03 (not included)
Pendant battery : 23A 12V Alkaline (included)
Pendant operating frequency : 433.92 MHz
Ambient temperature : +5 °C to +45 °C
Permitted relative air humidity : 25 to 85 %
11 Topcom warranty
11.1 Warranty period
The Topcom units have a 24-month warranty
period. The warranty period starts on the day the
new unit is purchased. There is no warranty on
standard or rechargeable batteries (AA/AAA
type). Consumables or defects causing a
negligible effect on operation or value of the
equipment are not covered. The warranty has to
be proven by presentation of the original or copy
of the purchase receipt, on which the date of
purchase and the unit-model are indicated.
11.2 Warranty handling
A faulty unit needs to be returned to a Topcom
service centre including a valid purchase note and
a filled in service card. If the unit develops a fault
during the warranty period, Topcom or its officially
appointed service center will repair any defects
caused by material or manufacturing faults free of
charge, by either repairing or exchanging the
faulty units or parts of the faulty units. In case of
replacement, colour and model can be different
from the original purchased unit.
The initial purchase date shall determine the start
of the warranty period. The warranty period is not
extended if the unit is exchanged or repaired by
Topcom or its appointed service centre.
11.3 Warranty exclusions
Damage or defects caused by incorrect treatment
or operation and damage resulting from use of
non-original parts or accessories are not covered
by the warranty. The warranty does not cover
damage caused by outside factors, such as
lightning, water and fire, nor any damage caused
during transportation. No warranty can be claimed
if the serial number on the units has been
changed, removed or rendered illegible.
Any warranty claims will be invalid if the unit has
been repaired, altered or modified by the buyer.
Topcom Axiss 830