Topcom AXISS 830 Manual De Usuario página 8

Topcom Axiss 830
7.10 Record message
For SOS calls, the Axiss 830 will broadcast a
standard pre-recorded message unless you
record your own message.
• Press .
• Press 4 x to select "RECORD
MESSAGE".
• Press and hold
After the beep, please say the message.
Now release the
recording.
• Press to leave the menu.
The maximum length of this recording is
20 seconds.
The default message is :
"THIS IS AN EMERGENCY CALL, TO
ACCEPT THIS CALL PRESS ZERO"
7.11 Check message
The message you recorded in previous chapter
can be verified.
• Press .
• Press 5 x to select "CHECK MESSAGE".
• Press to listen to the recorded
message.
• Press to leave the menu.
To erase the recording, press
playback.
7.12 Pair new pendant / Remove pendant
The pendant is registered in the Axiss 830 by its
ID code. In case of repair or other reasons it can
be necessary to register the pendant to the
telephone. The pendant can also be deleted from
the Axiss 830.
To pair a pendant :
• Press .
• Press 2 x to select "PAIR NEW
PENDANT".
• Press . "PAIRING" will be displayed.
• Press to start the pairing process.
Now press the button on the pendant.
"DONE" will appear if the pairing is successful.
8
and wait for the beep.
button to finish the
during
• Press to leave the menu.
To remove a pendant :
• Press .
• Press 2 x to select "PAIR NEW
PENDANT".
• Press . "PAIRING" will be displayed.
• Press or to select "DELETE?"
• Press to delete the pendant.
• Press to leave the menu.
8 Using the Axiss 830
8.1 Making a call
• Enter the telephone number.
• Press to delete a wrongly entered digit.
• Pick up the handset or press
make a hands-free call.
The volume of the handset can be set to
HI or LO by using switch
During a call made with the handset you
can switch to hands-free by pressing
and hanging up the handset.
The hands-free volume can be adjusted
using the volume button
In case the telephone is connected to a
PBX system it might be necessary to add
a pause after the PBX access code. The
phone can generate a 4 second pause
time.
Example : 0 P 012345678
Press to enter a pause.
The call duration timer will start in the display 4
seconds after the number was dialed.
or to
.
25
9 .
Topcom Axiss 830