Descargar Imprimir esta página

Amica FD225.4 Manual De Uso página 67

Ocultar thumbs Ver también para FD225.4:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 82
Problems
The appliance does
The electric circuit is disrupted
not work
The lighting inside
The bulb is loose or fused (only appliances
the chamber does
with bulb lightning type)
not work
Incorrect setting of the adjustment knob
The ambient temperature is higher or lower
than the climate range from table with
technical specification
The appliance is located in a sunlit place or
near heat sources
Too much warm food loaded at a time
Temperature inside
the appliance is not
Internal air circulation obstructed
low enough or too
high
The air circulation at the back of the ap-
pliance is obstructed
The door of the frid- ge/freezer is opened
too often and/or remains open for too long
The door does not close completely
The compressor is switched on too rarely
Door gasket inserted incorrectly
Incorrect setting of the adjustment knob
The appliance
See. "Temperature inside the appliance
works continuously
is not low enough for description of other
possible causes
The water discharge opening is clogged
(depending on the model)
Water collects in
the lower part of the
appliance
Internal air circulation obstructed
Incorrect levelling of the appliance
The appliance
generates unusual
The appliance is touching furniture and/or
noise
other objects
Certain sounds can be heard during normal use of the refrigerator, which do not affect its correct operation.
Sounds, which can be easily prevented:
noise caused by the appliance which is not level - adjust the position with the adjustable turn-in front feet. Alterna-
tively, place pads made of soft material under the rear rollers, especially when the appliance is placed on tiles.
touching the adjacent piece of furniture - move the refrigerator away.
creaking of the drawers or shelves - take out and put back the drawer or shelf.
sounds of clinking bottles - move bottles apart.
Sounds heard during normal use are mainly due to operation of the thermostat, compressor (switching on) and cooling
system (thermal expansion and contraction of the radiator caused by flow of the cooling agent).
TROUBLE-SHOOTING
Possible causes
67
Remedies
- check whether the plug is properly inserted into
the socket
- check whether the power cable of the appliance is
not damaged
- check whether there is voltage in the socket, by
plugging another appliance, e.g. a night lamp
- check whether the appliance is switched on by
setting the thermostat to a position above 0.
- fit the bulb correctly or replace it (see section above
"Replacing the interior light bulb)
- reset the knob to a higher position
- the appliance is adapted to operation in the clima-
te range from table with technical specification.
- move the appliance to another place. Observe the
guidelines contained in the manual
- wait 72 hours until the food becomes cool (fre-
ezes) and the required temperature is reached
inside the chamber
- place the food and containers in such a way that
they do not touch the rear wall of the fridge
- move the appliance min. 30 mm away from the
wall
- reduce the frequency of opening the door and/or
shorten the time when door remains open
- place the food and containers so that they would
not interfere with door closed
- check whether the ambient temperature is not
lower than climate class
- press the gasket in
- reset the knob to a lower position
See. "Temperature inside the appliance is not low
enough for description of other possible remedies
- clean the discharge opening (see the operating
manual – chapter entitled "Defrosting the fridge")
- place the food and containers in such a way as
that they do not touch the rear wall of the fridge
- level the appliance properly
- place the appliance at a location that ensures
proper clearances around it

Publicidad

loading