Selecting The Temperature - Waeco CoolMatic CD20 Instrucciones De Montaje Y De Uso

CD20, CD30
7.3

Selecting the temperature

The switch on the thermostat (see fig. 3 1, page 4) displays the selected
temperature.
Switch position
MAX
MIN
➤ If you wish to set the temperature to cooling, turn the thermostat knob
(see fig. 3 1, page 4), to the desired temperature range.
7.4 Switching off the coolbox
I
NOTE
If you wish to leave the cooling device switched off for a longer
period, clean it and leave the drawer slightly open. This will
prevent unpleasant odours from forming.
➤ Open the coolbox drawer.
➤ To switch off the coolbox, turn the thermostat knob (see fig. 3 1, page 4)
to the "0" position.
✓ The coolbox is switched off.
➤ If you wish to stop using the coolbox, disconnect the connecting cable
from the battery.
EN
Temperature range (dependent of ambient temperature)
CD20
approx. 0 °C in interior
approx. +15 °C in interior
CD30
approx. –2 °C in interior
approx. +12 °C in interior
Operation
25