Publicidad
Idiomas disponibles
Idiomas disponibles
www.groupdynamics-laundry.com
sales@groupdynamics.lv
GB
INSTRUCTIONS FOR INSTALLATION AND USE
FOREWORD
Thank you for having chosen this machine.
If you follow the present instructions
carefully you will certainly be satisfied with
its performance and guarantee.
In the event of claims or comments, the
reference text will be considered the one
written in the manufacturer's native language,
that is, in Italian.
1. GUARANTEE
- The guarantee has a validity of twelve (12)
months starting from the date of purchase of
the appliance or of any integral part of it.
- The guarantee covers the replacement of
any defective parts which are ensured as
having been damaged during manufacture.
It is applied directly by the dealer.
- Labour costs are always to be met by the
purchaser, together with transport, packaging
costs, and transport risks.
- The guarantee is subordinated to the
restitution of damaged parts which have to
be sent CARRIAGE PAID along with
information on the appliance, such as model,
serial number and defect of the machine in
which the damaged part was mounted.
- The guarantee is not valid if the appliance
has been misused or if there have been
mistakes in the electrical connections, wrong
or inappropriate installation, regardlessness
of the instructions concerning assembly and
use or changes carried out by unauthorised
persons. The guarantee is void when the
serial number has been scratched or taken
off or altered in any way.
- The guarantee is not valid for the following
items: parts which are subject to a normal
wear like belts, valve membranes and rubber
parts at large. Electric components like motor,
coils, contactors, heaters and so on.
2. INTRODUCTION
The present booklet has been drawn up in a
simple and rational way, so as to acquaint the
reader with the appliance. Please, read it
carefully and keep it with the machine yet
consider that the warning and advice
contained in this manual might not cover
every possible contingency. This is why it is
important to point out that common sense,
care and caution cannot be supplied with the
machine, but must be supplied by those
responsible for its installation, maintenance
and use. Whoever operates the machine must
read this manual beforehand.
Should the appliance need repairing, the
manufacturer recommends the use of
original spare parts (paragraph 8.4 explains
how to order them).
The descriptions and sketches given in this
manual do not bind the manufacturer, who
reserves the right to duly update them and/or
include any upgrading modification of parts
and fittings as he deems necessary for
manufacturing or commercial purposes, at
any time and without previous notice.
3.INSTRUCTIONS, RESTRICTIONS
AND OTHER USES
During use, cleaning and maintenance
procedures; it is absolutely necessary to make
sure that the moving parts of the appliance
(motor, chain, etc.) must not be reached with
tools or hands. The manufacturer declines
any responsibility for any injury arising
during use, cleaning or maintenance
procedures.
When using any electric or electronic
appliance one must comply with certain
basic rules. In particular: do not touch the
machine with damp or wet hands or feet; do
not use it while barefoot. Do not expose the
appliance to atmospheric agents like rain,
salt, salinity, etc. Do not allow children or
unqualified people to use the appliance
without proper supervision. Do not iron
fabrics which are not heat-resistant with
high temperatures. Do not iron layers of
laundry which are thicker than 8 mm or
laundry which is not suitable for this type of
ironer, or clothes that contain humidity
exceeding the recommended limit. Do not
smoke near the machine or while using it. Do
not remove or ignore safety devices. Do not
leave anything on the hot parts of the
appliance, not even when ironing has been
finished, because the basin needs a long time
to cool. Do not clean the machine by using
direct or indirect water jets; therefore, install
it far from areas where water jets are used.
ANY
USE
NOT
EXPRESSLY
MENTIONED HERE BELOW MUST
BE CONSIDERED AS HAZARDOUS.
THE MANUFACTURER DECLINES
ANY
RESPONSIBILITY
DAMAGE DUE TO IMPROPER,
WRONG OR FOOLISH USE.
DISCONNECT THE APPLIANCE
FROM THE POWER SUPPLY BEFORE
ATTEMPTING ANY SERVICING.
11
INSTRUCTIONS
FOR THE INSTALLER
4. INFORMATION ABOUT SHIPPING,
UNPACKING,
STORING THE MACHINE
4.1 SHIPMENT
To transport and/or ship the appliance, follow
these suggestions carefully:
When carrying the appliance into a building,
use the appropriate pallet or a similar
platform; use a manual or electric fork lift
possessing the requisite hoisting capacity
and suitable for handling such appliances
(see technical data, page 28). Check that the
ironer can surmount any existing obstacle or
narrow passage (like staircases, doors, etc.).
Never drag the appliance by a side panel
or any other part.
When shipping the ironer, use only the
original packing material to ensure sufficient
stability during transport.
4.2 STORAGE
Should the appliance be stored for a long
period before being installed, keep it in its
original package, as this guarantees best
protection. Check that the room conditions
correspond to those mentioned in paragraph
5.3. If the ironer is not to be used for a long
period after startup, make sure that it is
disconnected from the electric power supply
and cover it with its original, plastic
protection bag.
4.3 UNPACKING
1) Prior to accepting the ironer from the
carrier, check that the packing material does
not show any damage. If it does, the machine
too might have sustained the consequences.
If so, unpack the machine in the presence of
the carrier and sign the delivery note with
some reservations. The manufacturer
assumes no liability for any damage due to
FOR
transport or incorrect storage.
2) Unpack the appliance with the utmost
care so as to avoid damage. Remove the
transport pallet by unscrewing the screws
from the inner right and left side panels.
3) Assemble the wooden board onto the
appropriate supports by means of the grub
screws and appropriate bolts as shown in
fig.6; the upper end of the screw and the
longer side of the board must face upwards.
4) Make sure that the instruction booklet,
which is usually stuck on the outside of the
package, is not discarded and lost.
Packing material (plastic bags, polystyrene,
wood, cardboard, nails, etc.) represents a
MOVING
AND
Publicidad
