Parkside PHKSA 20-Li A1 Manual Del Usuario página 22

Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This cordless circular saw (hereinafter "appliance")
is designed for longitudinal, cross and mitre cuts in
firmly supported solid wood, chipboard, plastics
and lightweight construction materials. Any other
uses of or modifications to the machine are deemed
to be improper usage and may result in serious
physical injury. Not for commercial use.
Features
Figure A:
Safety lock-out
ON/OFF switch
Cutting depth scale
Release button for battery pack
Battery charge level button/battery display LED
Battery pack*
Locking screw
Spindle lock
Base plate
Rip fence slot
Figure B:
ON/OFF switch laser
Auxiliary handle
Laser warning
Laser aperture
Cutting angle scale
Wing screw for cutting angle pre-selector
Wing screw for rip fence slot
Rip fence
Blade guard
■ 18 │ GB
Clamping flange
Clamping screw
Release lever for the blade guard
Saw blade
Chip ejector
Vacuum adapter for dust extraction
Hex key
Figure C:
Charger*
Red control LED
Green control LED
Package contents
1 cordless circular saw
1 rip fence
1 vacuum adapter for dust extraction
1 hex key
1 saw blade (pre-assembled)
1 operating manual
Technical data
Cordless circular saw: PHKSA 20-Li A1
Rated voltage:
Rated idle speed:
Saw blade:
150mm
Max. cutting depth:
max. 48 mm
Use only the following battery to operate the
cordless tool: PAP 20 A1*
Type:
Rated voltage:
Capacity:
Cells:
20 V (DC)
n 3800 rpm
0
1x Ø 150 mm x Ø 16
mm, 18 teeth
At 0°: 48 mm
At 45°: 36 mm
LITHIUM ION
20 V (DC)
2 Ah
5
PHKSA 20-Li A1