Descargar Imprimir esta página

universalblue UVM2000-22 Manual De Instrucciones página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

13. Base Fixed Screw
You can check the product features in table
01 on page 5.
ASSEMBLY AND INSTALLATION
Before using this appliance, remove
the packaging and inspect the fan. If
the appliance may be damaged, please
contact the store where you purchased
it.
See pictures 01 and 02 on page 4 .
• Take the main body, put it into the
base (12), and fixed by base fixed
screw (13)
• Take the back grill (5), put it on the
motor (6), and fixed by grill lock nut
(4)
• Take the blade (3), put it into the
motor (6), and fixed by blade lock nut
(2)
• Take the front grill (1), put it to match
the back grill (5). And fixed by fixed
screw (11) and fixed nut (10)
Speed function. See picture 03 on page 4.
There's 3 speed to select.
14.
Off
15. Low speed
16. Mid speed
17. High speed
Oscillation
• Lift up the oscillation button, the fan
flow in one angle at all
• Press down the oscillation button,
the fan flow from left to right.
It can also select the fan from up and down,
by adjust the fan flow angle
CLEANING AND MAINTENANCE
This appliance does not require a lot of
maintenance. However, in order to extend
the life of the appliance, we suggest that
you read the following notes about cleaning
and maintenance:
Before cleaning the appliance always
disconnect the power plug from the
receptacle.
• The appliance, the power cord and the
power plug should not be immersed
in water or other liquids when you are
cleaning them. Clean them with a dry
cloth.
• If it is very dirty, the outside of the
appliance can be wiped carefully with
a moist cloth and then dried carefully.
Make sure that no moisture penetrates
into the interior of the appliance.
• Do not use any harsh cleaners, steel
brushes, scouring powder or other hard
objects to clean the appliance as these
can cause scratches on the surfaces.
• Clean the appliance regularly.
• Never use solvents, benzene or oil-
based cleaners as these can damage the
housing.
• Re-tighten visible screw connections
on the appliance regularly in order to
ensure that the device is functioning
properly.
ENVIRONMENTAL INFORMATION
This appliance is labelled in
compliance with European
directive 2012/19/EU for Waste
Electrical
Equipment
ensuring that this appliance is
disposed of correctly, you will help prevent
any possible damage to the environment
and to human health, which might
otherwise be caused if it were disposed of
in the wrong way.
The symbol on the product indicates that
it may not be treated as normal household
waste. It should be taken to a collection
point for the recycling of electrical and
electronic goods.
This appliance requires specialist waste
disposal. For further information regarding
the treatment, recover and recycling of this
EN
and
Electronic
(WEEE).
By
15

Publicidad

loading

Este manual también es adecuado para:

Uvm2001-22Uvm2003-24Uvm2002-24