Setting up the camera in the field
Once all program settings have been setup properly, your
camera is ready for field use.
Getting started
Listed below are some helpful pointers on how to use your
camera to get the best results.
•
Mount the camera about 1.5~2m (5~6 feet) high with the
camera pointed at a slight downward angle.
•
Mount the camera facing north or south NOT east or west
as the rising and setting of the sun could produce false
triggers and overexposed images.
•
If you're covering a trail, face the camera down or up the
trail.
•
Clear out any brush or weeds in front of camera. These
can cause false triggers due to temperature and motions
disturbances in front of the camera (especially on windy
days).
•
Check the power level of the batteries.
•
Make sure the memory card is properly inserted and have
sufficient available space.
•
Verify time and date is correct.
•
Make sure to turn the camera from SET to A or B or
MANUAL mode before you leave.
SL1008 - Indice A
62/200