Thick black smoke
Service
A hazardous condition may result if a heater is used that has been modified or is not
■
functioning properly. When the heater is working properly:
• The flame is contained within the heater.
• The flame is essentially blue.
• There is no strong disagreeable odor, eye burning or other physical discomfort.
• There is no smoke or soot internal or external to the heater.
• There is no unplanned or unexplained shutdown of the heater.
• There is no Flashback.
• There are no excessive popping noises during operation.
• There is no diminished and uneven emitter glow.
The parts list shows the heater as it was constructed. Do not use a heater, which is different
from that shown. In this regard, only the cylinder connections and regulator supplied with the
heater. Do not use alternative parts. For this heater the regulator is set for 11.0" water
column outlet pressure. If there is any uncertainty about the regulator setting, have it
checked. A heater that is not working properly must be repaired, but only by a trained,
experienced service person.
If your heater needs maintenance or is not working properly, please contact your local
■
authorized agent for service. It is a necessity to contact an authorized source for
replacement of parts and/or other servicing.
Reminder: Use the wheel while moving this patio heater
■
OR LOG IN TO OUR WEBSITE UNDER CUSTOMER SERVICE SUPPORT
Blockage in burner
IF YOU HAVE QUESTIONS OR CONCERNS
PLEASE CALL BOND TOLL FREE #
1-866-771-BOND (2663) OR TO BETTER EXPEDITE
YOUR REQUEST FEEL FREE TO EMAIL US
customerservice@bondmfg.com
www.bondmfg.com
BOND MANUFACTURING CO.
1700 West 4th Street Antioch, CA 94509 USA
Remove blockage and clean
burner inside and outside
14