Bond 67521 Manual Del Usuario página 6

Step 2 –Attach Head Assembly
to Post
■ Unscrew 4pcs bolts which
preassembling on the head
assembly. Please see Figure
3.
■ Load head assembly by
inserting gas hose into post.
Please see Figure 4 and
Figure 5
■ Insert head assembly into
post. Tighten securely using
bolts (4pcs). Please see
Figure 6
Régulateur
Step 3 –Attach Reflector Stud to
Head Assembly
■ Attach reflector stud (3pcs)
and flat washers (3pcs) to the
top of head assembly and
tighten the bolts securely
Please see Figure 7
.
Figure 3
0Figure 4
4 pcs
bolts
Figure 5
6