Publicidad
Idiomas disponibles
Idiomas disponibles
magnetic lamps can potentially cause an
explosion or a fire.
If rechargeable batteries are used
„
incorrectly, there is a risk of explosion or of
skin burns from escaping battery fluid.
Never throw rechargeable batteries on a
„
fire. They may explode or cause toxic
fumes.
Do not take rechargeable batteries apart or
„
short-circuit them.
Charge the battery at normal room
„
temperature (approx. 20 °C).
Use only an SELV mains adaptor for
„
charging.
z Risk of leakage from
rechargeable batteries
Avoid exposing rechargeable batteries to
„
extreme conditions and temperatures, e.g.
radiators or direct sunlight.
Avoid contact with skin, eyes and mucous
„
membranes! In the event of skin contact
with battery acid, rinse the affected area
immediately with plenty of clean water and
seek medical advice immediately!
WEAR PROTECTIVE GLOVES!
„
Leaking or damaged rechargeable
batteries can cause chemical burns
if they come into contact with skin.
Therefore, wear suitable protective gloves in
such cases.
In the event that of battery leaks, remove
„
battery from the product immediately to
avoid damage.
z Before first-time use
Check that all package contents are present.
Inspect the cordless magnetic lamps
the USB charging cable
external damage. If you find any signs of
damage, do not use the cordless magnetic
lamps. Please contact Customer Service at
the address indicated.
Unpack all parts of the product. Remove the
42
GB/IE/NI/CY/MT
and
1
for any signs of
9
packaging material. Keep the packaging in
a safe place out of the reach of children.
There is a risk of suffocation if children are
allowed to play with packaging material.
z Assembly and installation
Please note: Dispose of all packaging
material.
Take the magnetic holder with the adhesive
„ „
pad
and pull off the protective strip (see
8
Fig. D).
Now stick the magnetic holder in the
„ „
desired position. To ensure good adhesion,
make sure the surface is flat, dry and free
of grease.
Fix the cordless magnetic lamp
„ „
magnetic holder
8
integrated magnet
Fig. C).
Please note: Removing the adhesive pad
may cause damage to the surface in some
cases. We can accept no liability for such
damage. When the battery needs to be
recharged, the magnetic lamp can simply be
removed from the magnetic holder
Fig. C).
The holes on the back have no function.
z Charging the battery
RISK OF ELECTRIC SHOCK!
The cordless magnetic lamps
should only be recharged in dry
indoor areas using an SELV mains adaptor.
Before using the cordless magnetic lamp
for the first time, please fully charge the
battery. To do so, use only the USB charging
cable supplied
�
9
Plug the USB charging cable supplied
„ „
into the micro-USB socket
cordless magnetic lamp (see Fig. F).
To charge the lamp, connect the USB
„ „
charging cable
9
(5 V
, max. 0.34 A).
Plug the USB mains adaptor into a power
„ „
to the
1
with the aid of the
in the casing (see
7
(see
8
1
9
on the
6
to a USB mains adaptor
1
Publicidad
