Gpu Overclocking - Clevo P750DM Manual Del Usuario

GPU Overclocking

1. Click On to enable GPU overclocking.
2. Use the sliders to adjust the settings for Core Increment,
Memory Increment and Fan Speed Offset (However if your
system supports Optimized GPU Overclocking then the
presets are customized for the best and most stable
system performance).
3. Click Save to
retain the setting
changes, and then
click OK when the
system warning
The message highlights the fact that
message appears,
while overclocking the GPU offers a
or Cancel to return
boost to graphics performance, it
to the utility.
can cause system instability in cer-
4. Clicking Off will
tain circumstances as the harder
return to the
you push the processor, the more
standard default
power you will need to supply to it,
settings.
and the hotter the system will run.
Therefore it is not recommended
that you enable GPU overclocking
for extended periods, only as and
when specifically required.
GPU Overclocking Off Using the Taskbar Icon
Move the cursor over the GPU Overclock
icon in the taskbar, and right-click it and se-
lect Turn off GPU overclocking.
22

Warning Message

Optimized GPU Overclocking Notes:
The following applies only to systems supporting opti-
mized GPU overclocking.
If you wish to use settings other than the preset optimized
settings you are free to do so. However should you wish to
return to the optimized presets at any time you can click
Reset at the bottom right of the Control Center.
Power Modes & Optimized GPU Overclocking
If you click on either the Quiet or Power Saving power
modes in the Control Center, then the optimized GPU over-
clocking will be turned off.
If you click on either the Performance or Entertainment
power modes in the Control Center then the optimized GPU
overclocking will be turned on.
Figure 15
Click to Reset to
Optimized Default
GPU Overclocking
Settings
