Publicidad
Idiomas disponibles
Idiomas disponibles
Functional Description
To start tool, depress the trigger switch, shown in Figure 1. To stop tool, release the switch.
The variable speed trigger switch permits speed control. The farther the trigger switch is
depressed, the higher the speed of the tool.
To lock the switch in the on position for continuous operation, depress the trigger switch and
push in the locking button. The tool will continue to run. To turn the tool off, from a locked
on condition, squeeze and release the trigger once. before using the tool (each time), be
sure that the locking button release mechanism is working freely. be sure to release the
locking button release mechanism before disconnecting the plug from the power supply.
Failure to do so will cause the tool to start immediately the next time it is plugged in. Dam-
age or injury could result.
The reversing lever is used to reverse the tool for backing out screws. It is located above the
trigger, Shown in Figure 1. To reverse the screwdriver, turn it off and push the reversing lever
to the right (when viewed from the back of the tool). Turn the tool off and push the lever to
the left for forward operation.
Figure 1
Reversing Lever
Trigger Switch
Locking Button
6
Publicidad
