Senco DURASPIN SG2510 Instrucciones De Operación página 8

Maintenance
Read section titled "Safety Warnings" before maintaining tool.
1. With battery removed or cord disconnected, make daily inspection to ensure free movement of nose-
piece and trigger.
Do not use tool if nosepiece or trigger sticks or binds.
2. lubrication of the feed system is not necessary. DO NOT OIl.
3. Wipe tool clean daily and inspect for wear, especially the bit and nosepiece. Replace as necessary.
WARNING
Repairs other than those described here should be performed only by trained,
qualified personnel. Contact SENCO for information at 1-800-543-4596.
Accessories
SENCO offers a full line of DuraSpin screws and accessories for your SENCO tools, including:
• bits
• Storage bag
• Assorted Nosepieces
• Safety Glasses
For more information or a fully illustrated catalogue of Senco accessories, contact your sales
representative or call Senco at 1-800-543-4596.
Technical Specifications
SG2510 Tech Specs
BIT SHANk SIZE
FREqUENCY
VOLTAGE
CURRENT
NO LOAD SPEED
WEIGHT
1/4" HEx
60 HZ
120 V
6.5 A
0-2500 MIN.
3.5 LBS.
SG4100 Tech Specs
BIT SHANk SIZE
FREqUENCY
VOLTAGE
CURRENT
NO LOAD SPEED
WEIGHT
8
1/4" HEx
60 HZ
120 V
6.5 A
0-4000 MIN.
3.1 LBS.