Publicidad
Idiomas disponibles
Idiomas disponibles
EN
9
MAINTENANCE
Remove the safety key and battery pack from the machine
before maintenance.
Keep the motor and battery pack free from grass, leaves or
too much grease.
Use only approved replacement parts.
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
9.1
REPLACE THE BLADE
20
Use only approved replacement blades.
Wear heavy gloves or wind cloth around the blade when
you touch the blade.
1. Stop the machine.
2. Make sure that the blades fully stop.
3. Remove the safety key and battery pack.
4. Turn the machine to its side.
WARNING
WARNING
CAUTION
CAUTION
CAUTION
22
23
25
21
25
24
24
22
23
WARNING
WARNING
English
5. Use a piece of wood to prevent the movement of the
blade.
6. Remove blades with a wrench or a socket:
•
Turn nut (24) to the right to remove blade A (20), spacer
(25) and positioner (22);
•
Turn nut (24) to the left to remove blade B (21), spacer
(25) and positioner (23).
7. Install the new blade. Position the blade with the cutting
edges toward the ground. Make sure the two posts on
positioner engage the holes on the blades.
8. Assemble the positioners and spacers as shown.
Positioner (22) for blade A only; positioner (23) for blade
B only. Mounting nuts and spacers of blade A are
interchangable with that of blade B.
9.2
VERTICAL STORAGE
1. Remove the grass catcher.
2. Remove the battery and safety key.
3. Pull through the handle holes to fold away the handles.
4. Lock the handles into position.
5. Stand the machine on end and make sure that the brackets
touch the floor.
9.3
STORE THE MACHINE
•
Clean the machine before storage.
•
Make sure the motor is not hot when you store the
machine.
12
Publicidad
