Milwaukee M18 FUEL 2871-20 Manual Del Operador página 4

FUNCTIONAL DESCRIPTION
8
9
10
1. Lever arm
2. Carry hook
3. Feed collar
4. Cable hook
5. Handle release button
6. Telescoping handle
7. Lever arm collar
ASSEMBLY
Recharge only with the charger
WARNING
specified for the battery. For spe-
cific charging instructions, read the operator's
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, unlatch the battery door, push
in the release buttons and pull the battery pack away
from the tool. Close and relatch the battery door.
Always remove battery pack before
WARNING
changing or removing accessories.
To insert the battery, unlatch the battery door and slide
the pack into the body of the tool. Make sure it latches
securely into place. Close and relatch the battery door.
Only use accessories specifically
WARNING
recommended for this tool. Others
may be hazardous.
Selecting the Proper Cable
Different size and types of cables are available for
different applications. Remove the protective tip
cover from new cables before use.
Cat. No.
48-53-2852 7/8" x 15' All Purpose Open Wind Sectional Cable
48-53-2851 1-1/4" x 15' All Purpose Open Wind Sectional Cable
48-53-2854 1-1/4" x 15' Heavy Duty Open Wind Sectional Cable
1
2
6
7
8. ONE-KEY™ indicator
9. Forward/Off/Reverse
10. Battery door
11. Rear guide hose
connection
Description
Cable Attachments for Use with
MILWAUKEE Coupling Cables
Cat. No.
7/8"
48-53-3830 48-53-4830 Straight Auger
48-53-3831 48-53-4831 Funnel Auger
3
48-53-3832 48-53-4832 3" Root Cutter
48-53-3833 48-53-4833 4" Root Cutter
4
48-53-3834 48-53-4834 6" Root Cutter
48-53-3835 48-53-4835 Small Opening Tool
5
48-53-3836 48-53-4836 Medium Opening Tool
48-53-3837 48-53-4837 3" Chain Knocker
48-53-3838 48-53-4838 4" Chain Knocker
48-53-3840 48-53-4840 Head Attachment Kit
CAUTION
diameter pipes.
Cable Attachment Installation
To install the attachment:
Snap the attachment coupler into the cable coupler.
11 Test the cable before inserting into the drain to make
sure the attachment does not fall off during use.
To remove the attachment:
Insert the pin key into the coupling hole and pull at-
tachment off of cable.
Connecting/Disconnecting Sectional Cables
Keep the cable couplings clean and lubricated. The
pin key must move freely and fully extend to secure
the connection.
To connect the sectional cables, slide the two cable
couplings together. Make sure the connection is secure.
1
To disconnect the sectional cables, insert the pin
key into the coupling hole and pull the cables away
from each other.
1
Using the Telescoping Handle
To use the telescoping handle, press and hold the
unlock button located near the handle. Pull the handle
out until it locks into place.
To return the handle, press and hold the unlock button
and push the handle into place.
4
Description
1-1/4"
To prevent damage to the cable and
attachments, do not use in larger
2
2