Aprimatic APRIBOX 700 Manual De Instrucciones página 25

PROFESSIONAL LEARNING PROCEDURE
Using this procedure the installer can determine the instant in which deceleration begins.
This can differ between opening and closing.
For better adjustment of the obstruction control, it may be necessary (mainly with the trimmer "FOR" set at the
!
maximum or with heavy doors), to intervene during the opening and closing phases (points 6 - 9b - 12b) by pressing
the activation key of the transmitter or the push button P1/SET on the control unit as soon as the driving carriage
comes into contact with the mechanical stop.
1. Put the door in an
intermediate position.
6. The door close until
mechanical stop
7. Press the push button P1/SET
or the automation activation
key of the radio control.
The control unit performs the
opening
End of learning
procedure.
12b Mechanical stop
intervenes.
End of closing
2. RESET: press and hold
the programming button
P1/SET for 2 sec.
5. The control unit
briefly open
8. Do you want
deceleration during
opening?
9a. When you want to start
the slow-down, press the
automation activation key
of a radio control or the push
button P1/SET
11. Do you want
NO
deceleration during
closing?
12a. When you want to start
the slow-down, press the
automation activation key
of a radio control or the push
button P1/SET
3. Yellow led
flashes
4. Within 5 seconds, press
the programming button
P1/SET for 1 sec.
Yellow LED stays on
NO
9b. Mechanical stop
intervenes.
End of opening
7. Press the push button
P1/SET or the automation
activation key of the radio
control. The control unit
performs the closing
GB
24