Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Using the Moulds
To ensure the proper operation of your appliance, when filling the moulds, do not exceed the
proportions indicated.
Silicone PROflex Mould*
The Cake Factory is only compatible with moulds belonging to the Tefal PROflex range,
dimensions 30 x 21 cm.
Pour into the mould
Remove the
Ensure that the
aluminium bowl
black reflector is
properly in place
and attached to
the bottom of the
appliance
* To cook canelés or for any use of a mould taller than 4.5 cm, directly place the PROflex mould in the Cake
Factory without the support grid.
Non-stick aluminium bowl
Grease the bowl
Fill the bowl
Remove the grid*
Steel moulds*
Fill the moulds up to 3/4.
Pour into
Place the moulds
Put the holder
steel moulds
into the holder
into the device
Mould shapes can be mixed if each of them respects same recipe and same quantity.
28
Place the grid on
Place the mould
Close
the reflector*
Insert the bowl
Close
Ensure that the
black reflector is
properly in place
and attached to
the bottom of the
appliance
Close
*Depending on model
After cooking
Remove the support
Place the support
Remove the moulds
frame from the
frame on a surface
from the support
cake factory with
suitable for heat
frame one by one
oven gloves
Melting chocolate*
Place the chocolate
Remove the grid
Close
in the aluminium
mould
To melt chocolate, use the Cake Factory non-stick aluminium mould or the PROflex chocolate
melting silicone mould (if included).
Individual dairy desserts/mousses* **
Do not put the lids on the glass pots during cooking.
Pour into the
Put the aluminium
Put the glass pots
glass pots
mould into the
in the aluminium
device
mould
Once the baking process is finished, remove the dish and the glass pots from the Cake Factory,
still hot, with the help of a potholder and leave to cool for 10 minutes before putting the lids on.
Let the jars cool down for 2 hours at room temperature before putting them in the refridgerator.
Dairy desserts/mousses to share*
Pour into
Put the
Close
the aluminium
aluminium mould
mould
into the device
Allow to cool for a
few minutes before
removing from the
mould.
Put chocolate in a
Place the grid on
Close
suitable container
the reflector
Close
*Depending on model
**Depending on model, included or sold separately
(in a pack of 6, with mention "Cake Factroy").
EN
29
Publicidad
