doppler Active 200 Manual página 8

GB
Active 200; 240; 180x120; 200x130
Assembly and inst r uc tion
manual
Carefully read through the
complete instruction manual,
particularly the safety notes.
Failure to heed this instruction
may result in severe injury or damage to
the product. Hold onto the instruction
manual for future reference or in order to
pass them onto third parties.
Your safet y
Please observe the following
safety notes. The manufactur-
er is not liable for damage as
the result of failure to comply.
Only use the sun shade with sufficient
ballasting (see Technical data).
Always place the product on a firm and
level surface.
Use a stable base for the sun shade.
The product should only be erected by a
competent adult.
When opening and closing the sun
shade, please make sure to keep your
hands outside of the folding mechanism.
Close the sun shade in case of approach-
ing wind or storm. Otherwise, it could be
caught by a gust and overturned and in-
flict damage in the process or sustain
damage as a result.
Never ignite an open fire in the vicinity of
or underneath the sun shade. The shade
may bolt fire or be damaged by airborne
sparks.
The sun shade is not a children's toy.
Children could trap their fingers. Also,
the sun shade is heavy and could injure
children if it tips over.
Do not hang anything on the lateral brac-
es of the sun shade or even use them for
chin-ups.
The sun shade can protect your skin
from direct UV radiation, but not from re-
8
93413 i 20200709.indd 8 93413 i 20200709.indd 8
flected UV rays. For this reason, please
also use a cosmetic sun block.
In order to protect the sun shade from
excessive strain, close the shade in the
event of rain or snow and secure it with
a tie strap.
The cover is not suitable for machine
washing, dry cleaning or bleaching.
Do not use aggressive chemical cleaning
agents or fluids, solvents, abrasive sub-
stances or objects, bleaching agents,
high-pressure cleaners or strong clean-
ing products.
Please note the information on the care
label sewn into the sun shade.
Intended use
The sun shade is suitable for providing
protection against direct UV radiation.
It is not intended to provide protection
against rain or snow.
Set ting up the shade
To secure the sun shade, you must use
the following shade base: for the model
200 411557
240 421557
180x120 470520
200x130 458557
1. Place the sun shade base in the de-
sired location.
2. Release the locking mechanism a on
the bottom pole (see figure A).
3. Let the shade slide at least 10 cm in-
to the bottom pole. Tighten the lock-
ing mechanism a by turning it clock-
wise (see figure B).
4. Place the shade pole in the sun shade
base and fix it in place; see the in-
struction manual for the sun shade
base.
30 kg
40 kg
40 kg
40 kg
15.07.2020 08:10:25 15.07.2020 08:10:25