Descargar Imprimir esta página

Jackery Explorer 2000 Pro Manual Del Usuario página 14

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Q: Why is the output to the low-power device automatically turned o after
several hours?
A: In case of forgetting to turn off the output (causing the battery to drain), the Low Power Mode will
be turned off by default. That is, when the port is connected to a small load device(AC Output ≤ 25W,
USB Output ≤ 2W, Car Port ≤ 2W) for 12 hours, the device will automatically be turned off. In case you
want to resume recharging, press the car port button/USB button/AC button to restart the device. If
you want to turn on the Low Power Mode, long press the AC Button and DISPLAY until the Low Power
Mode icon
appears on the screen. If you need to turn off the Low Power Mode, repeat the above
operation until
TROUBLESHOOTING
Errors
Error Code
(F0-F9)
Types
BMS communication failure
inverter communication failure
charging module communication
failure
battery failure
battery over-voltage
battery under-voltage
inverter error
charging module error
Overcurrent/short circuit
charging or discharging
protection
DC output overcurrent/short
circuit protection
High temperature warning
Low temperature warning
Solutions
Contact after-sales service
Contact after-sales service
Contact after-sales service
Contact after-sales service
Contact after-sales service
Contact after-sales service
Contact after-sales service
Contact after-sales service
Resolve the problem by pulling
out plug or electrical appliances,
the product can recover itself.
If not solved, please contact our
after-sales service.
Resume operation by pulling out
electrical appliances, the product
can recover itself. If not solved,
please contact our after-sales service.
The product can recover itself
after battery is cooled
The product can recover itself
after the ambient temperature
increases
GB
12

Publicidad

loading

Este manual también es adecuado para:

Je-2000a