Publicidad
Idiomas disponibles
Idiomas disponibles
K.
Bar Graph
• The bar graph shows an approximate analog representation
of a measurement.
• The bar graph responds much faster than the digital display.
• The scale of the bar graph is zero to the maximum reading of
the selected range.
L.
Temperature Input Jack
• Input jack for K-type thermocouple probe.
M.
Temperature Switch
• Move the switch down to measure temperature, and up to
measure all other functions that require standard test leads. Test
leads must be removed before using the temperature function.
N.
Temperature Adjustment
• Remove battery cover.
• Place temperature probe in distilled
water with stirred crushed ice
(a standard for 0°C and 32°F).
• Use a fi ne tip screwdriver to adjust
the screw recessed in the bottom
right corner of the battery cavity as
shown until the display reads 32°F.
O.
Relative Reading / Zero mode
• Press for 2 seconds to enable/disable mode and store reading.
• Display will show the difference between the stored reading and
the live measurement.
9
1
2
5
7
6
3
AC/DC Current (large): < 400A
1.
Features:
• Center wire in guides for best accuracy.
• Opposing currents cancel (use line-splitter when necessary).
AC / DC Current (small): < 2000µA
2.
Features:
• Select AC or DC current source.
•
Current above 2000µA will damage instrument.
FUNCTION INSTRUCTIONS
HOLD
RANGE
PRESIONE
CA
CC
HOLD
RANGE
PRESIONE
CA
N
MAX/MIN
ZERO (DC)
MAX/MIN
ZERO (DC)
0
10
20
30
40
CC
REL (AC)
REL (AC)
Publicidad
