Altech CPS 130-4 Instrucciones De Montaje página 4

2.1 TRANSPORT AND STORAGE ATTENTION
The pump must be protected from moisture, and must not be subjected to
temperatures outside -10
2.2 HANDLING ATTENTION
Care must be taken when handling and installing the pump to avoid damaging
components. If damage occurs the pump must not be used. Abnormal handling
may invalidate the warranty.
3.1 GENERAL DESCRIPTION
The pump is fitted with a wet running motor. The pumping fluid lubricates the
bearings and rotor.
DESIGN AND FUNCTION/SAFETY DEVICES
The motor windings are impedance protected.
A provision for earthing the outer casing is provided.
STANDARD PUMPS
Models offer a single or variable speed setting to allow system requirements
to be accurately met.
ELECTRONIC PUMPS
The pump control channel is selected using a 3-stage selector switch in
accordance with the installation requirements.
PROHIBITED USE ATTENTION
The pump must not be used on secondary hot water services, handling drinking
water or food related liquids.
3
GB
2. PACKAGING & HANDLING
0 0
C and 50 C.
3. DESCRIPTION OF PUMP