Hilti TE 70-ATC/AVR Manual De Instrucciones página 15

3.8 Items supplied
Combihammer, side handle, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Store or at: www.hilti.group
4 Technical data
4.1 Combihammer
For details of the rated voltage, current, frequency and input power,
please refer to the power tool's country-specific type identification plate.
If the tool is powered by a generator or transformer, the generator or
transformer's power output must be at least twice the rated input power
shown on the rating plate of the tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the
rated voltage of the tool.
Weight
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.
5.1.1 Connecting the detachable supply cord
CAUTION
Risk of injury! Due to leakage current as a result of dirty contacts.
▶ Connect the detachable electric connector to the electric tool only when
it is clean and dry and when the supply cord is unplugged from the power
outlet.
1. Push the keyed, detachable electric plug connector into the tool as far
as it will go, until it is heard to engage.
2. Plug the supply cord into the power outlet.
5.1.2 Disconnecting the detachable supply cord
1. Unplug the supply cord from the power outlet.
*2244432*
2244432
22 lb
(10 kg)
English 9