Publicidad
Idiomas disponibles
Idiomas disponibles
Handle Adjustment Lock
Shift Lever Indicator
Now that you have set up your tiller for operation, get acquainted with its controls and
features. These are described on the next two pages and illustrated in Figure 12. This
knowledge will allow you to use your new equipment to its fullest potential.
The operation of any tiller can result in foreign objects being thrown into
the eyes, which can damage your eyes severely. Always wear safety glasses
during operation or while performing any adjustments or repairs.
Recoil Starter Handle
This handle is used to start the engine.
Air Filter
The air filter is a device on the engine air intake that prevents dust and dirt entering
the engine.
Muffler
Engine exhaust exits the engine via the muffler.
Clutch Control
The clutch control is located beneath the handle. Squeezing the clutch handle
against the handle engages the wheel and the drive mechanisms.
Craftsman Snow Throwers conform to the safety standard of the American National Standards Institute (ANSI).
OPERATION
Gear Selection Handle
WARNING
Meets ANSI Safety Standards
Clutch Control
Air Filter
Choke
Control
Depth Stake
Rear Tine Shield
Side Shield
Figure 12
Throttle Control
The throttle control regulates the speed of the engine and will shut off the engine
when it is moved into the stop
the FAST
(rabbit), SLOW
Choke control
Activating the choke control closes the choke plate on carburetor and aids in
starting engine. The choke lever slides between the RUN
positions.
10
Muffler
Fuel Cap
Throttle
Control
Recoil Starter
Handle
position. The throttle control moves between
(turtle) and STOP
positions.
Oil Fill Cap
& Dipstick
and CHOKE
Publicidad
