Height Adjustment; Securing Child - Joie i-Gemm signature Manual De Instrucciones

Height Adjustment

for Head Support and Shoulder Harnesses
see images -
19 22
Check that Shoulder Harness Straps
are set at the proper height. Please
choose the proper pair of shoulder
harness slots according to the child's
height.
!
The bottom of headrest must be
level with the highest point of
child's shoulder, it is shown as
but not above the shoulder line.
!
If the Shoulder Harness Straps are
not at proper height, the child
might be ejected from the infant
child restraint if there is a crash.
15
19
,
19
20
20
21
Squeeze the head support
adjustment lever , meanwhile pull
21
up or push down the head support
until it snaps into one of the 7
positions. The head support positions
are shown as
22

Securing Child

in the Infant Child Restraint
see images -
23 28
Note
1. Infant insert is for children's protection. Children whose height
is under 60cm are suitable to use the infant insert.
2. Before using the insert, please add the foam wedge.
3. After the child is placed in the seat, check if the shoulder
harnesses are set to the correct height.
Remove the head support portion of the infant
insert when the child's head no longer fits
comfortably. Detach the snaps on the head
support to remove the head portion of the insert.
Remove the body portion of the infant insert
when the infant's shoulders no longer fit
comfortably.
22
23
16