Height Adjustment - Joie i-Gemm Manual De Instrucciones

!
Press the recline adjustment
button, and adjust the infant child
restraint to the proper position.
There are 7 recline angles with
rearward facing mode.
!
The most convenient way to install
the infant child restraint is when the
th
base is in the 7 position.
!
Pull up on the infant carrier module
to be sure it is securely latched into
the base.
9. Level line on infant carrier module
must be level to the ground
when the infant child restraint is
installed.
16
10.To release the infant carrier
module, pull the infant carrier
module up while squeezing the
infant carrier module release
button. 17
11.To remove the base, press the
secondary lock button first
and then the button on the ISOFIX
connectors before removing
the base from the vehicle seat.
18
11
16
17
2
1
18
1
2
12.Press the ISOFIX release button to
store the ISOFIX.
19

Height Adjustment

for Head Support and Shoulder Harnesses
Check that Shoulder Harness Straps
are set at the proper height. Please
choose the proper pair of shoulder
harness slots according to the child's
height.
!
The bottom of headrest must be
level with the highest point of
child's shoulder, it is shown as
but not above the shoulder line.
!
If the Shoulder Harness Straps are
not at proper height, the child
might be ejected from the infant
child restraint if there is a crash.
19
2
20
20 ,
21
21
1
12