RIDGID R86014 Manual Del Operador página 7

FEATURES
PRODUCT SPECIFICATIONS
Chuck ...........................................................1/2 in. Keyless
Motor .................................................................. 18 Volt DC
Switch ..........................................................Variable Speed
KNOW YOUR DRILL
See Figure 1, page 13.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AutoShift
™
When you select AutoShift
shift to low speed when it senses more torque is required
for the application.
BIT STORAgE
Bits provided with the drill can be placed in the storage area,
located on the base of the drill.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
Your drill has a direction of rotation (forward/reverse/center
lock) selector located above the switch trigger for changing
the direction of bit rotation. Setting the direction of rotation
ASSEMBLY
UNPACKINg
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACKINg LIST
AutoShift Drill
™
Double-ended Bit
Tool Bag
Operator's Manual
, your drill will automatically
™
No Load Speed ....................... 0-450/0-1,450 r/min. (RPM)
Clutch ................................................................ 24 Position
Torque ................................................................... 450 in.lb.
selector in the OFF (center lock) position will lock the switch
trigger to help reduce the possibility of accidental starting
when not in use.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release the
drill bit in the chuck jaws.
LED LIgHT
The LED light located on the front of the tool base illuminates
when the switch trigger is depressed. This provides addi-
tional lighting on the surface of the workpiece for operation
in lower-light areas.
TORQUE ADJUSTMENT RINg
Your drill has a 24-position clutch. The torque adjustment
ring can be turned to select the right amount of torque for
your application.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed with
increased trigger pressure and lower speed with decreased
trigger pressure.
WARNINg:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to
heed this warning could result in serious personal
injury.
WARNINg:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNINg:
To prevent accidental starting that could cause
serious personal injury, always remove the battery
pack from the product when assembling parts.
7 - English