Installing The Software; Program Menus; Program Functions; Key - JMA TRS 5000 Manual De Instrucciones

• You can do more than one key without having to repeat
the process of successive readings.
• Possibility of preloading fixed code transponders with a
specific code and being able to adapt it to your require-
ments.

4.2.1 Installing the software

A. Follow the steps indicated in point 3.2 Installing and
Preparing the Machine.
B. Access the TRS-5000 directory and select the SETUP
file.
C. Once you have done this, the program is installed
automatically, as mentioned in point 3.2 Installing and
Preparing the Machine.
D. You can access the program in START ‡ PROGRAMS ‡
JMA ‡ TRS5000.
After doing everything mentioned above, switch on the
TRS5000 and then connect it to the PC via the USB. As
mentioned earlier, one of the ends of the cable is con-
nected to the machine and the other to the computer
port. You can choose any USB port on the PC, as you can
select it later from the Communications Port pull-down
menu available in the Options menu of the TRS5000's PC
Software Program.
The USB ports are managed by the Windows operating
system, so all those that are operative on the PC will
appear in the "Communication Ports" pull-down menu.
You have to select the one generated by the TRS5000
driver.
If all the steps have been followed satisfactorily, when
you switch on the machine while the program is being
run on the computer screen, the following message
appears on the TRS-5000 machine's display :
JMA TRS-5000
Connected to PC
Remember that the TRS copying machine must
be kept 80-100 cm away from any source of
electromagnetic interference, such as the PC
screen, a TV set, any electrical switching device,
a transformer, walkie-talkie, etc. It is to keep the
machine away from the computer screen, when
working in PC mode, that a serial line cable bet-
ween 1.5 and 1.85 m long is supplied.
16
5
Program
menus
Once the TRS-5000.exe file has been run, click on the rele-
vant icon for the program's main screen, which is shown
in Fig. 1, to appear.
The program is very easy to use and you can use it to
access the different operating modes with the TRS-5000
machine connected to a PC.
Figure 1: The program's main screen.
5.1

Program functions

As you can see, there are 5 options available in the
program's main menu:

1.- KEY

2.- FILE
3.- OPTIONS
4.- ? / (APPLICATIÓN)
5.- EXIT
They are each explained in more detail in the following
points:
5.1.1 KEY

5.1.1.1 Copy

Figure 2: Copy function Screen