Publicidad
Audible continuity:
If there is a resistor < 30 Ω, you hear a beep. When the circuit is open, the display
shows "OL".
Battery test
1.
Set the rotary switch to the position
2.
Attach the pin-plug of the black test lead to the COM-jack and the pin-plug
of the red test lead to the multi-function jack.
3.
Touch the poles of the battery with the probes.
4.
Once the reading stabilizes, read the value. The device displays the voltage
of the tested battery under load.
Internal load:
1,5 V 100
9 V 400
33
(1,5 V or 9 V)
English
Publicidad
