Metra 95-9327B Instrucciones De Instalación página 4

1. Using a cutting tool, remove the sections
of sub-dash indicated to provide
clearance for the radio and climate
controls. (Figure A)
2. Install the (2) panel clips to the
radio housing.
For models with a switch panel below
the climate control.
2. Remove (5) screws securing the switch
panel back plate, then remove the
switch panel circuit board.
3. Unplug the ribbon cable from the circuit
board. (Figure B)
4
KIT PREPARATION
Remove shaded areas
(Figure A)
(Figure B)
4. Attach the White connector from the
ribbon cable supplied with the kit to the
circuit board.
5. Reinstall the circuit board back into the
switch panel.
6. Clip the climate control panel, and
switch panel, into the radio housing.
(Figure C)
7. Attach the Black connector from the
ribbon cable to the climate control
panel. (Figure D)
For models without a switch panel below
the climate control.
8. Clip the switch panel cover to the radio
trim panel.
9. Disregard the ribbon cable, it will not be
used in this application.
Continue to Kit Assembly
(Figure C)
(Figure D)
|
386.257.1187 MetraOnline.com