Metra 95-9327B Instrucciones De Instalación página 5

ISO DDIN radio provision
1. Attach the radio brackets to the radio
using the screws supplied with the
radio. (Figure A)
Note: Radio mounting screws must
be flush with the mounting brackets.
Countersunk flat-head screws have been
provided if needed. (Figure A)
2. Locate the factory wiring harness and
connector in the dash and complete
all necessary connections to the radio.
Metra recommends using the proper
mating adapter from Metra and/or
Axxess. Test the radio for
proper operation.
3. Secure the completed assembly into the
dash with the factory screws.
4. Reassemble the dash in reverse order
of disassembly using radio trim
panel assembly to complete the
installation.
KIT ASSEMBLY
(Figure A)
5
REV. 2/9/2023 INST95-9327B