Descargar Imprimir esta página

Siefken DEMOLEDOR HEX 30 Instrucciones página 22

Publicidad

Idiomas disponibles

Idiomas disponibles

Before Use
Be careful of hidden electrical lines or gas and water pipes. Check the working
area, e.g. with a metal detector.
Always use the correct supply voltage!
The voltage of the power source must agree with the value given on the name-
plate of the machine.
Tool Changing
Functional Description
Read ail safety warning and all instruction. Failure to follow the warning and instruction may
result in electric shock, re and/or serious injury.
Intended Use
The power tool is intended for chiseling work in concrete, brick masonry and asphalt as well as
for driving in and compacting, when using the respective accessories
Assembly
Auxiliary handle
The tool must be supported with the auxiliary handle 3, which can be swiveled 360°. To re-set
and/or swivel the handle, loosen the hand grip 9, move the handle to the desired position
along the barrel and securely retighten the hand grip.
Changing the Tool
By installing and removing accessories, please make sure that the tool is OFF, and the cord
should not be plugged in. Pull out the stop pin 1 and swivel it to make the ange towards the
direction of motor housing.
Insert accessory into the tool holder through the dust shield, while twisting and pushing
inward until it locks into place. Then swivel the stop pin back.
Built to Exceed
3 YEARS
L I M I T E D WA R R A N T Y
7

Publicidad

loading

Este manual también es adecuado para:

Sd45