Before You Call For Service
Problem
No Power.
Cabinet Temperature
too High
Condensation on the
cabinet and/or door
If none of the above rectify the situation please contact our customer service depart-
ment at 1-800-26-
Trouble Shooting
Possible Cause What to do
A fuse in your home may
be blown or the circuit
breaker tripped
Power surge
Plug not fully inserted into
wall outlet
Temperature setting
Door not shut properly
or opened excessively
Exhaust vent is obstructed
Recently added a large
quantity of warm bottles
to the cabinet
High humidity conditions
in the home
Door not shut properly
or opened excessively
(1-800-263-2629).
11
Replace fuse or reset circuit breaker.
Unplug the wine cooler, wait a few
seconds and then plug it back in.
Make sure the 3-prong plug on the
wine cooler is fully inserted into
outlet.
Verify the temperature control setting.
adjust if neccessary.
Ensure that the door is fully closed
and that the gasket is sealing against
the cabinet. Open the door only as
needed and for short periods of time.
Verify there is nothing blocking the
front mounted exhausting vent.
Limit the quantity of warm bottles
being introduced to the cabinet at the
same time. Attempt to phase in the
load introduction if possible.
The condensation will subside once
humidity conditions return to normal.
Ensure that the door is fully closed
and that the gasket is sealing against
the cabinet. Open the door only as
needed and for short periods of time.