Samsung PS50A470 Manual Del Usuario página 40

Moving to the remembered position
1 Complete Step 1 of Entering the menu.
 Pressing a Colour (Red, Green, Yellow) button moves the
auto wall mount to the saved position.
➢ You can move the wall mount to one of the 3 pre-set
positions by pressing the Red (Position 1), Green
(Position 2) or Yellow (Position 3) buttons.
➢ If you adjust the position after moving to a pre-set
position, the position display will disappear.
➢ For installation, refer to the Installation Manual provided with
the wall mount.
➢ For product installation and the installation and moving of the
wall mount, make sure to consult a specialized installation
company.
➢ This installation manual is to be used when attaching the wall
mount to a wall. When attaching to other building materials,
please contact your nearest dealer.
➢ The auto wall mount will not work when Anynet+ is operating.
➢ 42 inches model is not compatible with the older wall mount
model (WMN5090A).
How to assemble the Stand-Base
Using the 6 screws for securing the stand base and the
monitor, firmly attach the monitor to the stand base.
(The exterior of the set may be different than the picture.)
BN68-01528A-Eng.indb 40
Warning
Firmly secure the stand to the TV
before moving it, as the stand may
fall and could cause serious injury.
➢
Two or more people should carry
the TV. Never lay the TV on the
floor because of possible damage
to the screen.
Always store the TV upright.
English - 40
Wall-Mount Adjustment
Position 1
Position
Adjust
(depending on the model)
In case of installing your TV on the wall,
close the cover (1) on the stand-base
connection part using two screws for
hiding.
►
►
1 2 3
Save Center
2008-04-18 오후 1:44