CASTOR INSTALLATION
Castor installation is recommended to avoid damage to fl oors.
1. Remove the castors from the bucket of the dehumidifi er.
2. Position the dehumidifi er on its side.
3. Locate the arrow on the bottom of the dehumidifi er and insert the castor
according to the arrow direction.
4. Slide the castor in as far as it will go. The castor will snap into place.
5. Repeat steps 1 to 4 for the other 3 castors.
CONTROL PANEL INSTRUCTIONS
NOTE: The control panel of the unit you purchased may be slightly different depending on the model number.
When you push the button to change operation modes, the unit will make a beeping sound to indicate that it is
changing modes.
1) POWER BUTTON: On/Off
2) FAN SPEED BUTTON: High/ Low
3) TIMER BUTTON: When unit is operating, press TIMER
to set number of hours desired until unit will shut off.
When unit is in stand-by, press TIMER to set number of
hours desired until unit will turn on.
Setting timer from 1-24 hours. To cancel the timer, pro-
ceed as above but set the "timer off" to zero (0) hours.
4) º C/ º F BUTTON: Press the º C/ º F button to toggle
between Celsius and Fahrenheit.
All manuals and user guides at all-guides.com
OPERATING INSTRUCTIONS
5) SET HUMIDITY/ CURRENT HUMIDITY DISPLAY:
When machine is running, it displays the current humidity.
Press UP or DOWN buttons to select humidity setting.
The humidity is adjusted in increments of 5% by each
press. Adjustable range is within 30% RH to 90% RH.
10 seconds after setting humidity, the display will change
back to the current humidity.
6) CURRENT TEMP/ TIMER SET DISPLAY:
When machine is running, it displays the current tem-
perature. Press the TIMER button to set the machine to
shut off automatically after specifi ed amount of time. 10
seconds after displaying the timer, the display will change
back to current temperature.
7) DEFROST LIGHT: When temperature is low, unit enters
defrost mode and defrost light illuminates.
8) BUCKET FULL LIGHT
When water tank is full, bucket full light illuminates.
5