Rowenta INTENSE PURE AIR CONNECT Manual página 11

4. Turn your purifier on & hold 5. Choose your Wi-Fi network and
the Wi-Fi button for 3 seconds enter the network password to
(you'll hear a "ding" sound and connect to your local Wi-Fi network.
the Wi-Fi indicator will flash to
indicate that your purifier is
successfully connected to Wi-Fi.)
I had trouble with the installation of the application:
Check compatibility on the website
www.compatibility-pureair.tefal.com
Can multiple users pair to one device
Of course ! New users just need to dowload the App « Pure Air by Rowenta », create an account
and do the pairing.
If the Wi-Fi in my home shuts off for a brief period will I lose control of my purifier via the app
If the product lost its connection, the product will stop automatically after 24h.
Pairing is not successful:
For the pairing, you need to be close to your air purifier and make sure that your Internet connec-
tion is good too.
I cannot control my purifier, why ?
If the WIFI indicator of the purifier is flashing:
1. check if your Internet connection at home is good
2. check if the password of your WIFI has been changed?
If the WIFI indicator of the purifier is lighted on, it means that the purifier is connected to the
network; in this case,
Check if your smartphone is well connected to internet ?
18
6. And you're done !
The Wi-Fi indicator lights to indicate
that your purifier is successfully
connected to Internet.
www.compatibility-pureair.rowenta.com
The scheduling doesn't work:
If the time slot is earlier than current time, by default the product will start next day.
Why the pairing didn't work?
Supported encryption type : WPA_1/WPA_2, TIPK, PSK, AES,
Supported networks: 2.4 GHz (not 5Ghz)
If there is a problem with my home Wi-fi during my holiday period, I can't
control my purifier via the app anymore ?
If the product lost its connection, the product will stop automatically after 24h.
I can't control my product:
If the Wifi LED on the product is lighted permanently but you can't control it via the APP. Please
unplug the product, wait for 10 seconds and replug the product. The product could be reconnected
automatically.
• Indication of air quality
Air quality indicator (A) is located on the top of the appliance.
Air Quality
Excellent
Slight pollution
or
Moderate pollution
High pollution
Extreme pollution
MAINTENANCE
Always switch the appliance off with the button (9) and unplug it before conducting any maintenance operation.
You can clean the appliance with a slightly damp cloth.
IMPORTANT: Never use abrasive products which could damage your appliance's appearance.
FILTERS
Filter
Pre-filter
Active carbon filter
Allergy+ filter
NanoCaptur+ filter
These figures are based on tests in which the air purifier is used for 8 hours per day in quiet mode.
The recommended frequency for cleaning and replacing the filters may vary depending on the
duration of use and the operating environment.
• A light indicates when the allergy+ filter needs to be replaced.
The light display indicates when the carbon filter needs replacing.
• The NanoCaptur+ filter contains translucent granules which change color according to the for-
maldehyde absorption rate. Refer to the color chart on the sticker inside the front door or the
filter itself to establish the filter saturation rate.Once the saturation rate has reached its maxi-
mum, the filter must be replaced. You have to check the filter saturation rate every six months.
• The pre-filter can be re-used: remove the dust using a vacuum cleaner or wash with water.
Air quality indicator color
Blue
Green
Yellow
Orange
Red
Action Cycles
Clean Every 2 to 4 weeks
Replace Every 12 months
Replace Every 2 years
Color changing
Replace
(see Color chart on filter)
EN
19