cecotec CONGA 890/SLIM Manual De Instrucciones página 22

ENGLISH
POWER OFF
• Turn the power switch at the bottom off (O is used for "turn off"; 1 is used for "turn on"; the
preset position of the product is O).
REMOTE CONTROL
Start cleaning
• The appliance will start cleaning when the
remote control is pressed.
• Before use, make sure the switch is on "I".
• If the robot has a pause of more than 10 minutes, it will turn off.
• To change the cleaning mode, read the section on "Mode options".
CHARGE
Place the cleaner on the charging base, make sure the charging poles are aligned.
STOP CLEANING
To stop the appliance, press the
OK button on the remote control.
4. OPERATION
There are several cleaning modes which adapt to different conditions, achieving perfect
results. The user can choose the most suitable mode on the remote control.
AUTOMATIC MODE:
It is the most frequent mode. The robot vacuums the floor automatically. If
there are are any obstacles on its way, it changes direction.
Tips: the machine can automatically clean the room while in this mode and
adjust the cleaner's path according to several ground environments.
22 CONGA 890 SLIM
05137_Conga Slim 890_Manual_PE/LI.indd 22
• button: Green/blue flashing light indicates the robot is charging.
• button: Green/blue light indicates the robot is fully charged.
Charge the robot for 12 hours before the first use.
button on the control panel or the
button in the control panel or on the
31/5/18 11:25