cecotec CONGA 890/SLIM Manual De Instrucciones página 23

SPOT CLEANING MODE: SPIRAL
The robot works in a spiral, focusing on a spot. When it finishes cleaning, it will
go back to the starting spot and stop
Tips: put the machine near the area to be cleaned, press the Spot Cleaning
button on the remote control to enter this mode.
EDGES CLEAN MODE
This mode can be used to vacuum the corners and walls. The robot runs along
hard obstacles. When it finishes cleaning, it will go back to the charging base
automatically.
Tips: The machine will automatically enter edge-cleaning when an edge is detected.
ROOM CLEANING MODE
This cleaning mode is used when the user wants only one room to be cleaned.
When it finishes cleaning, the robot will stop. Close the doors for the robot to
clean better.
BACK HOME MODE
The robot goes back automatically to the charging base when the battery is
under 15%. To send the robot back to the charging base press the button on the
remote control.
TIME SCHEDULING
To make the cleaning easier, the appliance has a timer mode that allows you to set the time and day of
the week on which the robot should clean. It is programmed through the remote control. Following the
scheduled settings, the robot will start cleaning automatically on the day and time set.
• The time options on the remote control are 24 hours a day.
• Before adjusting the time and settings from the robot, make sure the robotr is on "I" and the
button on the control panel is green/blue. If the light is not on, turn the robot on from the
control panel or the remote control.
SETTING THE CURRENT TIME AND DAY OF THE WEEK
• Press the button. The day of the week and the
• First select the day of the week. In order to do that, use the
current day.
• To change to the time, use the
procedure with the minutes: press
• Once set, press OK or
IMPORTANT: the day of the week will not show up on the display. To check it has been saved, press
and make sure the day of the week is correct.
05137_Conga Slim 890_Manual_PE/LI.indd 23
icons on the display will start flashing.
button. Use
, then to choose the minutes.
to confirm.
buttons and search the
to select the current time. Repeat this
CONGA 890 SLIM
ENGLISH
23
31/5/18 11:25