12
www.aeg.com
5.2 Movable shelves
The walls of the refrigerator are equipped
with a series of runners so that the
shelves can be positioned as desired.
This appliance is also equipped with a
shelf consisting of two parts. The front
half of the shelf can be placed under the
second half to make better use of space.
To fold the shelf:
1. Take out the front half gently.
2. Slide it into the lower rail and under
the second half.
Do not move the glass shelf
above the vegetable drawer
to ensure correct air
circulation.
5.3 LongFresh compartment
The storage temperature and the relative
humidity in this compartment provide
optimal conditions for the storage of
various kinds of food.
To learn about the temperature settings
in the LongFresh compartment please
refer to the "LongFresh compartment
setting" section.
LongFresh compartment is suitable for
the storage of a variety of fresh food (like
fish, meat, seafood, etc.) as it preserves
its high nutritional values as well as high
humidity level much longer in comparison
to the regular refrigerator.
5.4 Humidity control
The LongFresh compartment has stops
that prevent the drawers from falling out
1
2
when fully extended. To remove the
drawer:
1. Pull the drawer to the maximum.
2. Lift and pull out the drawer.
The drawers marked with water drop
symbols:
and
according to the desired storage
conditions independently of each other
with lower or higher humidity.
Regulation for each drawer is separate
and is controlled using the slide valve at
the front of the drawer.
• "Dry": low relative humidity.
This humidity level is reached when
both sliders are set into this position
and the ventilation openings are
wide open.
• "Humid": high relative humidity.
This humidity level is reached when
both sliders are set in this position
and the ventilation openings are
closed. Humidity is kept and can not
escape.
5.5 DYNAMICAIR
The refrigerator compartment is
equipped with a device that allows rapid
cooling of foods and keeps more uniform
temperature in the compartment.
This device activates automatically when
needed.
can be used