Orbegozo PWM 2232 Manual De Instrucciones página 11

PWM 2232 - PWM 2147
ILUSTRATION:
A) Control panel
B) Blade
C) Grill
D) Thumb volts
E) Bar
ASSEMBLY INSTRUCTIONS
Carefully unpack the contents of this carton.
Step 1 – In case that the support bars were not assembled, fit both together and fix them with the
screw and the nut (please check the following pictures)
Step 2 – To assemble the fan's head to the support bars, insert the screw through
the side of the support bars to the fan's head, according to the picture of the right:
OPERATING INSTRUCTIONS
Control panel
1. Connect the power supply plug to a wall power outlet. You can now operate the apparatus
by means of the function keys on the switch box or remote controller (if equipped).
2. A change in the function is usually indicated by a beep.
3. All function keys are enabled after switching on the ON/OFF switch manually. A change in
the function is usually indicated by a beep.
On/off switch
1. At start-up by pressing the ON/OFF function key, the fan will be put to operation at low
speed. After pressing ON/OFF key, you can choose between any other functions.
11