Publicidad
Idiomas disponibles
Idiomas disponibles
> Before start
> Hookup
Remote Controller
1
2
11
3
4
5
12
6
7
8
9
13
10
14
> Setup
1. Í button: Turns the unit on or into standby mode.
2. Input selector buttons: Switches the input to be played.
3. Q (QUICK MENU) button: You can perform common settings on
the TV screen. ( P24)
4. Cursor buttons and ENTER button: Select the item with the
cursors and press ENTER to confirm your selection.
5.
button: Displays the Setup menu.
6. Volume buttons: Allows you to adjust the volume. This button
also cancels the muting.
7.
button: Temporarily mutes audio. Press again to cancel
muting.
8. LISTENING MODE buttons: Allows you to select the listening
mode. ( P20)
MAIN/ZONE 2 buttons: Controls the multi-zone function. ( P23)
9. Play button: You can start play of the Music Server or USB.
10.
button: You can start repeat or random play of the Music
Server or USB.
CLEAR button: Deletes all characters you have entered when
entering text on the TV screen.
11.
button: Switches the information on the display.
12.
button: Returns the display to the previous state.
13.MODE button: Switches tuning to a station between automatic
tuning and manual tuning.
14.MEMORY button: Registers a radio station.
30°
30°
> Playback
> Part Names
Display
1
1. Speaker/Channel display: Displays the output channel that
corresponds to the selected listening mode.
2. Lights in the following conditions.
Ë: When headphones are connected.
Z2: When ZONE 2 is on.
NET: When "NET" is selected with the input selector and the unit is
connected to the network. It will flash if the connection to the network
is not correct.
USB: When "NET" is selected with the input selector and the unit is
connected by USB and the USB device is selected. Flashes if the
USB is not properly connected.
HDMI: When HDMI signals are input and the HDMI input is selected.
DIGITAL: When digital signals are input and the digital input is
selected.
3. Lights according to the type of input digital audio signals and the
listening mode.
4. Lights in the following conditions.
TUNED: Receiving AM/FM radio.
FM ST: Receiving FM stereo.
SLEEP: When the sleep timer is set.
AUTO STBY: Auto Standby is on.
Approx.5 m
5. Flashes when muting is on.
6. Displays various information of the input signals.
7. This may light when performing operations with the "NET" input
selector.
2
3
7
6
: When connected by BLUETOOTH.
: When connected by Wi-Fi.
4
5
En
7
27
Publicidad
