Publicidad
Idiomas disponibles
Idiomas disponibles
The installer must keep and store the technical documentation of the automatic gate and must fulfil all obligations
required. At the end of the job the installer must check the installation and the correct operation of the automatic device.
The installer must carry out a risk analysis and check that the system does not feature crushing or shearing points. If
necessary, corrective measures must be implemented and signals required by current regulations must be applied in
order to make the dangerous areas visible.
The identification data of the motorised system must be clearly visible on each installation.
The installer must provide full information about the automatic, manual and emergency functioning of the equipment and
deliver the operating instructions to the system user. Only use original spare parts for any repairs or for replacing parts.
The guarantee is void if this product is used in combination with others of other brands.
The manufacturer of the drive declines any responsibility if components incompatible with safety and correct operation
are installed.
INDEX
Packing contents........ .....................................................................................11
View of typical automation and names of components.............................................12
Technical data................................................................................................12
Typical connection and cable section...................................................................13
Dimensions....................................................................................................13
Consideration for installation..............................................................................14
Troubleshooting..............................................................................................17
PACKING CONTENTS
1-
OPERATOR
1-
KIT FASTENING PLATES AND
RELATIVE ACCESSORIES
1-
UNLOCKING KEY
1-
CAPACITOR (230Vca)
R223
Pg.
11
Publicidad
