Installation
24 English
DC68-03774H-05_IB_WA7000M_EN.indd 24
4. Connect the ends of the water supply
hoses to the water supply intake
connections at the back of the washer.
CAUTION
The water supply hose connected to the hot
faucet must be connected to the hot water
supply intake and the water hose connected
to the cold faucet must be connected to the
cold water supply intake.
5. Tighten the fittings by hand until they
are snug, and then tighten them an
additional two-thirds of a turn with a
plier.
NOTE
•
To ensure the correct water usage,
connect both the hot and cold water
faucets. If either or both are not
connected, an "4C" (no fill) code can be
displayed.
•
If you do not want to use the hot water
supply hose, insert the water intake cap
into the hot water supply intake. Then,
select Cold for the water temperature.
If you select Cold, all the lamps for the
water temperature options are turned
off.
CAUTION
Confirm that the water supply hoses are not
twisted or bent. If the hoses are twisted or
bent, the hoses can leak and cause electric
shock due to water leakage.
2023-06-22
4:56:13