Publicidad
Idiomas disponibles
Idiomas disponibles
5�7
Power source DIP switch configuration
Before installing the analog interface Kit art. 456, proceed to update the power source firmware to the latest release
available on Cebora web site (see instruction manual).
In the panel board, move the DIP switch to the ON position to enable the ROBOT mode (see following paragraphs).
5�7�1
MIG SYNSTAR panel circuit (art� 379 - 382 - 383)
24
DIP2 Robot configuration option
DIP2.1
ON
3301307
3301291
Publicidad
